ASR1001X-2.5G-K9 Specifications
|
| Physical specifications
Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets.
Refer to the applicable hardware installation guide for additional details. |
Height: 1.71 in. (43.43 mm)
Width: 17.3 in. (439.42 mm)
Depth: 18.17 in. (461.5 mm)
Weight:
● 25 lb (11.35 kg) fully loaded
Note: The Cisco ASR 1001-X Router has the route processor, ESP, and SIP integrated. |
| Default memory |
8-GB DRAM shared across route processor, ESP, and SIP |
| Number of SIPs or Ethernet line cards supported |
Integrated in chassis |
| Shared port adapters |
1 single-height SPA slot |
| Ethernet port adapters |
N/A |
| Cisco ASR 1000 Series ESP |
Integrated in chassis |
| Route processor |
Integrated in the chassis: Cisco ASR 1001-X Series Route Processor with Quad Core Processor |
| Redundancy |
Software: Yes |
| Built-in Gigabit Ethernet ports |
Yes: 6 Gigabit Ethernet Small Form-Factor Pluggable (SFP) ports |
| Built-in 10 Gigabit Ethernet port |
Yes: Two 10 Gigabit Ethernet Small Form-Factor Plus Pluggable (SFP+) ports
Note:Built-in 10-GB ports cannot be reduced to 1-GB speed. |
| Network interface module |
Yes |
| Cisco ASR 1000 Series |
Cisco ASR 1001-X |
| ESP support |
Cisco ASR 1000 Series 2.5-Gbps ESP (default)
Upgradable through a software-activated feature license to 5, 10, or 20 Gbps |
| ESP bandwidth |
2.5 to 20 Gbps |
| ESP memory |
Share the same control memory on route processor |
| SIPs and Ethernet line cards |
Integrated in chassis; not upgradable |
| Embedded hardware-based encryption |
Yes: Up to 8-Gbps crypto support throughput |
| Minimum Cisco IOS XE Software release |
Cisco IOS XE Software Release 3.12.0 |
| Rack-mounting |
Yes: 19-inch |
| Wall-mounting |
No |
| External USB flash memory |
1-GB USB flash-memory support |
| Redundant power supply |
Yes: Dual power supplies by default; option of either AC or DC power supply
Note: A mix of one AC and one DC power supply is not supported. |
| Power input |
Worldwide ranging AC input range (85 to 264 VAC)
Worldwide ranging DC
(-40 to -72V; 48V nominal) |
| Power consumption |
● Maximum (DC): 242W
● Maximum (AC): 250W
● Maximum (out): 250W |
| Airflow |
Front-to-back |
| Operating temperature (nominal) |
32 to 104°F
(0 to 40°C) |
| Operating temperature (short-term) |
32 to 122°F
(0 to 50°C) |
| Operating humidity (nominal) (relative humidity) |
10 to 85% |
| Operating humidity (short-term) |
5 to 90% |
| Storage temperature |
-40 to 150°F
(-40 to 70°C) |
| Storage humidity (relative humidity) |
5 to 95% |
| Operating altitude |
-500 to 10,000 feet
(152 to 3048 meters) |
| Network Equipment Building Standards (NEBS) |
GR-1089 and GR-63 (in progress) |
| EMC standards |
● FCC 47 CFR Part 15 Class A
● VCCI Class A
● AS/NSZ Class A
● ICES-003 Class A
● EN55022/CISPR 22 Information Technology Equipment
(Emissions)
● EN55024/CISPR 24 Information Technology Equipment
(Immunity)
● EN300 386 Telecommunications Network Equipment
● (EMC)
● EN50082-1/EN61000-6-1 Generic Immunity Standard |
| Safety Standard |
UL60950-1
CSA C22.2 No. 60950-1-03
EN 60950-1
IEC 60950-1
AS/NZS 60950.1 |
