875764-S01 is an HPE ProLiant DL380 Gen10 server with two Intel® Xeon® Gold 6148 processors, 64 GB memory, P408i-a storage controller, eight small form factor drive bays and two 800W power supplies.
875764-S01 Specification
|
| Processor |
Intel® Xeon® 6148 (20 core, 2.4 GHz, 27.50 MB, 150W) |
| Included hard drives |
None ship standard, 8 SFF drives supported |
| Maximum memory |
3.0 TB with 128 GB DDR4 |
| Network controller |
331i 4x 1GbE, optional FlexibleLOM |
| Storage controller |
1 HPE Smart Array P408i-a Controller |
| Dimension |
8.73 x 44.55 x 67.94 cm (3.44 x 17.54 x 26.75 in) |
| Weight |
14.9 kg (32.75 lb) Minimum: 8 SFF chassis with 1x SFF HDD and 7 HDD blanks, 2x Drive Bay blanks, 1x processor including standard heatsink, 1x power supply (plus blank), 1x Smart Array, 1x Riser installed, cables for the above)
23.6 kg (51.5 lb) Maximum: 12 LFF hard drives (no rear drives), 2x processors, 2x power supplies, 1x Smart Array, 2x Risers installed) |
| Input Requirements (per power supply) |
Rated Line Voltage: 100 to 120 VAC, 200 to 240 VAC |
| BTU Rating Maximum |
For 500W Power Supply: 1979 BTU/hr (at 100 VAC), 1911 BTU/hr (at 200 VAC), 1965 BTU/hr (at 240 VAC) for China Only
For 800W Power Supply: 3207 BTU/hr (at 100 VAC), 3071 BTU/hr (at 200 VAC), 3112 BTU/hr (at 240 VAC) for China Only |
| Power Supply Output (per power supply) |
Rated Steady-State Power:
For 1400W Power Supply: 1400W (at 240 VAC), 1400W (at 240 VAC)
For 800W Power Supply: 800W (at 100 VAC), 800W (at 240 VAC), 800W (at 240 VAC) input for China only
For 500W Power Supply: 500W (at 100 VAC), 500W (at 240 VAC), 500W (at 240 VAC) input for China only
Maximum Peak Power:
For 1400W Power Supply: 1400W (at 200 to 240 1VAC), 1400W (at 240 VAC) input for China only
For 800W Power Supply: 800W (at 100 to 127 VAC), 800W (at 200 to 240 1VAC), 800W (at 240 VAC) input for China only
For 500W Power Supply: 500W (at 100 to 127 VAC), 500W (at 200 to 240 VAC), 500W (at 240 VAC) input for China only |
| Standard Operating Temperature |
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate of change may be limited by the type and number of options installed. |
