7600 SIP-200 Specification
|
| Compatibility |
Cisco 7600 Series SUP32-3B, SUP720-3B, SUP720-3BXL, RSP720-3C, RSP720-3CXL, RSP720-3C-10G, and RSP720-3CXL-10G systems |
| Minimum Software Compatibility |
Cisco IOS® Software Release 12.2(18)SXE, or later |
| Protocols |
● TCP
● User Datagram Protocol (UDP)
● IPv4 Unicast and Multicast
● IPv6 Unicast and Multicast
● MPLS |
| Encapsulation |
● Frame Relay
● Multilink Frame Relay – FRF.16
● PPP
● MLPPP
● Bridge Control Protocol (BCP)
● High-Level Data Link Control (HDLC)
● ATM permanent virtual circuit (PVC)-constant bit rate (CBR), variable bit rate real-time (VBR-rt), VBR non-real-time (VBR-nrt), and unspecified bit rate (UBR)
● ATM switched virtual circuit (SVC)-CBR, VBR-rt, VBR-nrt, UBR, and UBR+
● POS |
| Cards, Ports, and Slots |
Four SPA bays per Cisco 7600 SIP-200. The SIP-200 supports oversubscription. |
| QoS, Access Control Lists (ACLs), and Low-Speed Aggregation Features |
| QoS |
● Modular QoS CLI (MQC)
● Classification
◦ ACLs
◦ IP Precedence
◦ IPv4 and IPv6
◦ Differentiated services code point (DSCP)
◦ MPLS experimental values (MPLS EXP)
◦ Frame Relay Discard Eligibility
◦ ATM cell loss priority (CLP)
● QoS mappings – CLP, DE to IP type of service (ToS), MPLS EXP; and conversely
● Hierarchical QoS |
| Queuing |
● Per-virtual circuit queuing
● Low-latency queuing (LLQ)
● Weighted Fair Queuing (WFQ)
● Class-Based Weighted Fair Queuing (CBWFQ) |
| Congestion Avoidance |
Weighted Random Early Detection (WRED) |
| Traffic Marking, Shaping, and Bandwidth Policing |
● Marking – IP Precedence, DSCP, MPLS EXP, ATM CLP, and FR DE
● Policing
● Distributed traffic shaping (DTS)
● Hierarchical traffic shaping
● Distributed network-based application recognition (NBAR) |
| Fragmentation |
● Distributed link fragmentation and interleaving (dLFI)
● Frame Relay Forum FRF.12 |
| ACLs and Security |
● Standard, extended, dynamic, reflexive, and time-based ACLs
● Classification based on packet length |
| Bandwidth Efficiency |
● cRTP
● ATM permanent-virtual-circuit (PVC) bundles
● Frame Relay virtual circuit bundles |
| Layer 2 Bridging and Interworking |
● RFCs 1483 and RFC 2684 ATM Virtual Circuits – Routed and Bridged
● RFC 1490 Frame Relay Virtual Circiuts – Routed and Bridged
● Multipoint Bridging for RFC 1483 virtual circuits
● Multipoint Bridging for RFC 1490 virtual circuits
● Bridge Control Protocol
● Bridging of routed encapsulation
● Routed bridged encapsulation |
| Layer 2 and Layer 3 VPNs |
● RFC 2547 MPLS VPNs
● Ethernet over MPLS (EoMPLS)
● ATM over MPLS (ATMoMPLS)
● ATM Adaptation Layer 5 (AAL5) virtual circuit mode, single-cell relay virtual circuit mode
● Frame Relay over MPLS (FRoMPLS)
● PPP over MPLS (PPPoMPLS)
● HDLC over MPLS (HDLCoMPLS)
● Virtual circuit-to-virtual circuit local switching – Frame Relay, ATM – AAL0, AAL5 |
| High Availability |
● Nonstop forwarding (NSF)
● Stateful switchover (SSO)
● Automatic Protection Switching (APS) with ATM, POS SPAs
● OIR |
| Memory |
● 512-MB default Double Data Rate (DDR) synchronous dynamic RAM (SDRAM)
● Optionally upgradable to 1-GB DDR SDRAM memory |
| Supported SPAs |
ATM
● Cisco 2-Port OC-3c/STM-1c ATM Shared Port Adapter
● Cisco 4-Port OC-3c/STM-1c ATM Shared Port Adapter
POS/Channelized
● Cisco 2-Port OC-3c/STM-1c POS Shared Port Adapter
● Cisco 4-Port OC-3c/STM-1c POS Shared Port Adapter
● Cisco 1-Port Channelized OC-3c/STM-1c POS Shared Port Adapter
Copper/Channelized
● Cisco 8-Port Channelized T1/E1 Shared Port Adapter
● Cisco 2-Port Clear Channel T3/E3 Shared Port Adapter
● Cisco 4-Port Clear Channel T3/E3 Shared Port Adapter
● Cisco 2-Port Channelized T3 (DS0) Shared Port Adapter
● Cisco 4-Port Channelized T3 (DS0) Shared Port Adapter
● Cisco 4-Port Serial Shared Port Adapter
Fast Ethernet
● Cisco 4-Port Fast Ethernet Shared Port Adapter
● Cisco 8-Port Fast Ethernet Shared Port Adapter |
| Environmental Conditions |
● Operating temperature: 32 to 104°F (0 to 40°C)
● Storage temperature: –40 to 167°F (–20 to 70°C)
● Relative humidity: 10 to 90%, noncondensing
● Operating altitude: –60 to 2000m |
| MIBs |
● Cisco Entity MIB (CISCO-ENTITY-MIB)
● Cisco Entity Asset MIB
● CISCO-ENTITY-VENDOR-OIDTYPE-MIB OID
● Cisco Entity Field-Replaceable Unit (FRU) Control MIB
● CISCO-ENHANCED-MEMPOOL-MIB
● CISCO-PROCESS-MIB
● CISCO-ENVMON-MIB
● Cisco Entity Alarm MIB
● Simple Network Management Protocol (SNMP) MIB II (RFC 1213)
● Remote Monitoring (RMON) MIB (RFC 1757) |
| Network Management |
● Supported with CiscoWorks CiscoView
● CiscoWorks Resource Manager Essentials (RME)
● Cisco IP Solution Center (ISC) |
| Physical Specifications |
● Occupies one slot in a Cisco 7600 Series Router
● Supports up to 12 Cisco 7600 SIP-200s in a 13-slot chassis
● Requires Supervisor Engine SUP32-3B, SUP720-3B, SUP720-3BXL, RSP720-3C, RSP720-3CXL, RSP720-3C-10G, or RSP720-3CXL-10G
● Dimensions (H x W x D): 1.74 x 15.3 x 17 in.
● Weight: 8.5 lb |
| Power |
● 160W power consumption per Cisco 7600 SIP-200
● 240W maximum power consumption with Cisco 7600 SIP-200 and 4 SPAs |
| Indicators |
Cisco 7600 SIP-200 status:
● green (operational)
● orange (faulty) |
| Regulatory Compliance |
CE marking |
| Safety |
● UL 60950
● CSA C22.2 No. 60950
● EN60950
● TS001
● IEC 60950
● AS/NZS3260 |
| EMC |
● FCC Part 15 Class A
● ICES-003 Class A
● VCCI Class A
● EN55022 Class A
● EN55024
● EN50082-1
● CISPR22 Class A
● ETS-300 386 |
| Telecommunications Standards |
● ITU-T G.610
● ITU-T G.703
● ITU-T G.707
● ITU-T G.783 Sections 9-10
● ITU-T G.784
● ITU-T G.803
● ITU-T G.813
● ITU-T G.825
● ITU-T G.826
● ITU-T G.841
● ITU-T G.957 Table 3
● ITU-T G.958
● ITU-T I.361
● ITU-T I.363
● ITU I.432
● ITU-T Q.2110
● ITU-T Q.2130
● ITU-T Q.2140
● ITU-T O.151
● ITU-T O.171
● ETSI ETS 300 417-1-1
● ACA TS 026 (1997)
● BABT/TC/139 (Draft 1e) |
