ASR1013 Specification
|
| Physical specifications
Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets.
Refer to the applicable hardware installation guide for additional details. |
Height: 22.8 in. (579.1 mm)
Width: 17.2 in. (437.4 mm)
Depth: 18.15 in. (461.0 mm)
Weight:
● 184.0 lb (83.46 kg) (with redundant AC power supply, SPA, route processor, SIP blank covers, two Cisco ASR 1000 Series 40-Gbps ESPs [ASR1000-ESP40] or ASR1000 Series 100-Gbps ESPs [ASR1000-ESP100] or ASR1000 Series 200-Gbps ESPs [ASR1000-ESP200], two Cisco ASR 1000 Series RP2s [ASR1000-RP2], six Cisco ASR 1000 Series 40-Gbps SIPs [ASR1000-SIP40], and no SPAs) |
| Default memory |
8-GB DRAM RP2
8-GB DRAM RP3 |
| Number of SIPs or Ethernet line cards supported |
6 |
| Shared port adapters |
24 SPA slots |
| Ethernet port adapters |
12 EPA slots |
| Cisco ASR 1000 Series ESP |
2 ESP slots |
| Route processor |
2 route-processor slots |
| Redundancy |
Hardware: Yes |
| Built-in Gigabit Ethernet ports |
0 |
| Built-in 10 Gigabit Ethernet port |
No |
| Network interface module |
No |
| Cisco ASR 1000 Series |
Cisco ASR 1013 |
| ESP support |
Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40),
Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100), and Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200) |
| ESP bandwidth |
40 to 200 Gbps |
| ESP memory |
Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40):
8-GB DRAM
Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100): 16-GB DRAM
Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200): 32-GB DRAM |
| SIPs and Ethernet line cards |
Supports Cisco ASR 1000 Series 40-Gbps SIP Carrier Card (ASR1000-SIP40), Cisco ASR1000 Series MIP 100-Gbps Carrier Card (ASR1000-MIP100), and ASR 1000 Fixed Ethernet Line Card; two 10 GE + twenty 1 GE (ASR1000-2T+20X1GE) line cards; and six 10 GE line cards (ASR1000-6TGE) |
| Embedded hardware-based encryption |
Yes: On Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) with up to 11-Gbps crypto support throughput, Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) with up to 29-Gbps crypto support throughput, and Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200) with up to 78-Gbps crypto support throughput |
| Minimum Cisco IOS XE Software release |
Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) requires Cisco IOS XE Software Release 3.1.0S, ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) requires Cisco IOS XE Software Release 3.7.0S, and ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200) requires Cisco IOS XE Software Release 3.10.0S |
| Rack-mounting |
Yes: 19-inch |
| Wall-mounting |
No |
| External USB flash memory |
1-GB USB flash-memory support |
| Redundant power supply |
Yes: Quad power supplies (redundant pairs) by default; option of either AC or DC power supplies
Note: A mix of AC and DC power supplies is not supported. |
| Power input |
Worldwide ranging AC (180 to 264V; 240V; 60 or 50 Hz nominal)
Worldwide ranging DC
(-40.5 to
-72; -48V nominal) |
| Power consumption |
● Maximum (DC): 4200W
● Maximum (AC-high line): 4000W
● Maximum (out): 3390W |
| Airflow |
Front-to-back |
| Operating temperature (nominal) |
Same as for Cisco ASR 1001-X |
| Operating temperature (short-term) |
Same as for Cisco ASR 1001-X |
| Operating humidity (nominal) (relative humidity) |
Same as for Cisco ASR 1001-X |
| Operating humidity (short-term) |
Same as for Cisco ASR 1002 |
| Storage temperature |
Same as for Cisco ASR 1001-X |
| Storage humidity (relative humidity) |
Same as for Cisco ASR 1001-X |
| Operating altitude |
Same as for Cisco ASR 1001-X |
| Network Equipment Building Standards (NEBS) |
GR-1089 and GR-63 |
| EMC standards |
Same as for Cisco ASR 1001-X |
| Safety Standard |
|
