WS-C2960X-24TS-LL Specification
|
| General |
| model info: |
WS-2960X-24TS-LL |
| enclosure type |
Rack-mountable - 1U |
| Ports |
24 x 10/100/1000 + 2 x 1G SFP |
| Network management Interface |
10/100 Mbps Ethernet (RJ-45) |
| Available PoE Power |
None |
| Forwarding bandwidth(Gbps) |
50Gbps |
| Maximum stacking number |
None |
| Stack Bandwidth |
None |
| Forwarding Performance |
68.5Mpps |
| Switching bandwidth |
100Gbps |
| Maximum active VLANs |
64 |
| MAC Address Table Size |
16K (default) |
| CPU |
APM86392 600MHz dual core |
| RAM |
256 MB |
| Flash Memory |
64 MB |
| Status Indicators |
Per-port status: Link integrity, disabled, activity, speed, and full duplex System status: System, RPS, Stack link status, link duplex, PoE, and link speed |
| Expansion / Connectivity |
| Console ports |
USB (Type-B), Ethernet (RJ-45) |
| Stacking cable |
None |
| Power Redundancy |
Option (PWR-RPS2300) |
| Voltage range (Auto) |
110V-240V |
| Power Consumption Operational |
0.035KVA |
| Miscellaneous |
| Width |
17.5 Inches (44.5 cm) |
| Depth |
11 Inches (27.9 cm) |
| Height |
1.75 Inches (4.5 cm) |
| Package Weight |
8.2 Pounds (9.19Kg) |
| Weight |
20.26 Pounds (3.7Kg) |
| Rack Mounting Kit |
optional |
| MTBF in hours |
622,350 |
| Compliant Standards |
IEEE 802.1D Spanning Tree Protocol
● IEEE 802.1p CoS Prioritization
● IEEE 802.1Q VLAN
● IEEE 802.1s
● IEEE 802.1w
● IEEE 802.1X
● IEEE 802.1ab (LLDP)
● IEEE 802.3ad
● IEEE 802.3af and IEEE 802.3at
● IEEE 802.3ah (100BASE-X single/multimode fiber only)
● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
IEEE 802.3 10BASE-T
● IEEE 802.3u 100BASE-TX
● IEEE 802.3ab 1000BASE-T
● IEEE 802.3z 1000BASE-X
● RMON I and II standards
● SNMP v1, v2c, and v3
● IEEE 802.3az
● IEEE 802.1ax |
| System software / license |
| System software |
IOS LAN Lite |
| license |
NERGY-MGT-100-K9, EW-DO-100-DE |
| features |
● Jumbo Frames
● VLANS
●Voice Vlan
●VTPv2
●CDPv2
●LLDP
● 802.3ad LACP
● PVST/PVST+
● 802.1W/802.1S
● Port Fast/Uplink Fast
● port CoS Trust and Override
● Scheduling
● Priority Queuing
● Configure CoS Priority Queues
● Weighted Tail Drop
● DSCP transparency |
| Network security |
● SSH, SSL and SCP
● RADIUS and TACACS+
● SNMPv3 crypto
● 802.1x
● 802.1x Accounting / MIB
● 802.1x w/ port security
● 802.1x w/Voice VLAN
● 802.1x Guest VLAN
● 802.1x VLAN assignment
● 802.1x MAC-Auth Bypass
● BPDU/Root Guard
● Port Security
● Private VALN Edge
● Storm Control
● Block unknown unicast and multicast
● IGMP Snooping
● IGMP Filter/Throttle |
| Management and Troubleshooting |
● Auto-MDOX
●TDR
● UDLD
● IP SLA Responder
● layer 2 / IP Traceroute
● SPAN
● RSPAN
● Express Setup
● Device Manager
● Cisco Network Assistant
● Smartports + Advisor
● Troubleshooting Advisor
● Drag-and-drop Cisco IOS Upgrade
● IP Address DHCP
● Autoinstall with saved configuration
● Configuration Replace
● DHCP Auto Image Upgrade
● DHCP Port Based Allocation
● Error Disable MIB |
| Environmental Ranges |
| Operating temperature up to 5000 ft (1500 m) |
23ºF to 113º |
| Operating temperature up to 10,000 ft (3000 m) |
23ºF to 104ºF |
| Short-term exception at sea level* |
23ºF to 131ºF |
| Short-term exception up to 5000 feet (1500 m)* |
23ºF to 122ºF |
| Short-term exception up to 10,000 feet (3000 m)* |
23ºF to 113ºF |
| Short-term exception up to 13,000 feet (4000 m)* |
23º to 104ºF |
| Storage temperature up to 15,000 feet (4573 m) |
-13º to 158ºF |
| Operating altitude |
Up to 10,000 feet |
| Storage altitude |
Up to 13,000 feet |
| Operating relative humidity |
10% to 95% noncondensing |
| Storage relative humidity |
10% to 95% noncondensing |
